Num'AxesPIE1046 4G Trail Camera

About

With the PIE1046 trail camera, you will receive the photos or videos captured (photos by MMS or Email, videos by Email). A built-in GPS antenna allows you to have geolocation information printed on the photos.

When you insert the SIM card (standard size), the camera will automatically detect the mobile operator and setup the corresponding sending parameters (2G, 3G and 4G compatible). Thanks to the 4G network, photo and video transmission is faster and power consumption lower.

The PIE1046 trail camera can be setup and activated remotely thanks to a free mobile app available for Android and iOS.

• Wide detection angle: 100°
• Wide field of view: 100°

Product Features

• Wide field of view: 100°
• PIR sensor (motion sensor):
• Wide detection angle: 100°
• Detection distance: up to 65 feet (20 meters)
• Adjustable detection sensitivity: low/medium/high
• Infrared flash:
• Invisible black LED
• Range: up to 65 feet (20 meters)
• You can turn off part of the LED:
• allows you to avoid overexposed night photos/videos
• useful if you plan to place the camera at very close range to the subject you want to photograph or film.
• Automatic IR Flash (activated according to brightness)
• Adjustable night mode: a shorter or longer exposure time allows you to extend or minimize the IR flash range
• Photos and/or videos recipients:
  You can enter 1, 2, 3 or 4 mobile phone numbers (recipients will only receive MMS and therefore only photos, no videos)
•  You can enter 1, 2, 3 or 4 e-mail addresses (recipients will receive MMS or e-mails and therefore photos and/or videos)
• Photo sending:
• by MMS: you can send photos only in small size (640×480)
• by e-mail (FTP or GPRS): you can choose the size of the photos send by e-mail:
• small size (640×480)
• large size (1920×1440)
• original size (8 MP, 12 MP or 24 MP depending on the photo resolution selected)
• Video sending:
• by e-mail (FTP or SMTP) only and if the 4G network is available in the area where the trail camera is installed
• You can set and activate the camera remotely thanks to a free mobile app (Android/iOS – Name of the application: NumCam)
• When you insert the SIM card (standard size), the camera will automatically detect the mobile operator and setup the corresponding sending parameters (only if your operator is preprogrammed in the device).
• Remote antenna supplied:
• very useful in areas where the network is weak
• antenna height: 22 cm – cable length: 2 m – magnetic base
• Capture modes:
• Still images: from 1 to 5 images per trigger
• Videos with audio recording: programmable length from 5 to 59 seconds
• Still images + videos with audio recording: a still photo and a video clip are both captured for each trigger
• Image resolution: 8 MP / 12 MP / 24 MP
• Image file format: JPEG
• Video resolution: WVGA / HD 720P / Full HD 1080P
• Video file format: MOV
• PIR detection mode: the camera will take photos or videos when triggered by the PIR sensor detecting activity in the area it covers
• Time Lapse mode: the camera will take photos or videos automatically at your choice of interval during a defined period of time you set up
• Hybrid mode: PIR detection operation + Time Lapse operation at the same time
• Date, time, temperature, moon phase, identification number, battery level and GPS coordinates can be pirnted on the photos
• Memory support: SD card or micro SD card with adapter from 4GB up to 32GB, class 10 minium (not supplied). The device also works with the NUM’AXES 64GB micro SD card with adapter. 64GB memory cards of other brands may not work with the device. You can purchase micro SD cards with adapter from the present website at any time (8GB, 16GB, 32GB or 64GB).
• Cycle recording on the SD card:
• User programmable: ON/OFF
• When the SD card will be full, the camera will continue to record new photos/videos by deleting the oldest photos/videos.
• Identification number of the device: programmable – allows you to identify from where and from which camera the photos are – Very useful if you have several devices
• Password: programmable

Product Specifications

• 2-year warranty
• Weather resistant (IP66)
• Trigger speed: approx. 0.4 second
• Weight: 418 g (without batteries) – 696 g (with batteries)
• Dimensions: 148 x 116.5 x 75.5 mm
• Remote antenna supplied
• Power: 12 x AA alkaline batteries or 12 AA Ni-MH rechargeable batteries (not supplied) – You can purchase those batteries at any time on this website.
• Optional external power supply: power pack and solar panel
• 2.4″ colour LCD screen: for easy setup and replay photos/videos
• Built-in 2.0 USB port for image/video download

What's in the box

• 1x trail camera model PIE1046
• 1x black antenna
• 1x remote antenna
• 1x USB cable
• 1x nylon mounting strap
• 1x user’s guide